Search

+86-511-85681866

@sfr168.com  忘记密码

Welcome to Sino-Foundry Refractory(Jiangsu) Co.,Ltd.!

sousuo

Copyright 2018 Sino-Foundry Refractory(Jiangsu) Co.,Ltd. AllRight Reserved. Powered by:www.300.cn    苏ICP备14030673号-1

Quick Links:

Mobile Website

Product Center

Product Package

Page view
Product name

SFR-JOLTER specialized vibrator tools for dry vibrating material

Affiliate classification
没有此类产品
Detail

1. General description:

JOLTER is divided into furnace bottom vibrating plate and side wall inner mold percussion type vibrating tool. The tool is driven by compressed air to automatically build furnace compaction, which can effectively vibrate the upper and lower furnace lining compactness . Compared with the traditional electric furnace building and manual furnace building, the pneumatic furnace vibrator has the following advantages:

It can effectively prevent the uneven compaction of the furnace lining caused by human factors,so it makes the furnace has the same high quality every time.

Using this tool can effectively reduce labor intensity and greatly shorten furnace building time,especially for large-tonnage electric furnaces, which can greatly improve furnace building quality.

It is special tool for dry ramming materials for furnace building, which can achieve the ideal furnace lining design effect.

 

Main construction techniques:

1) Vibrate the vibrating plate for 20-30 minutes After filling the bottom of the furnace, complete the construction of the furnace bottom.

2) After positioned the side wall mold, add the material till the throat. Hoist the side wall inner mold percussion type pneumatic vibrator to vibrate from bottom to top. During the vibration process, as the furnace lining material moves down, add material accordingly. Stop vibrating when the vibrator reaches about 200mm away from throat.

 

2、Technical parameters of furnace bottom pneumatic vibrator:

Working air pressure ≥0.6MPa

Vibration frequency 4600-6500rpm

Compressed air consumption >1.8M3/min

 

3、Technical Parameters of Pneumatic Hammering Sidewall Furnace Building

Machine:

Working air pressure ≥0.6MPa

Hammering frequency 2200 times/min

Exciting force 1800N

Impact torque 26J

Compressed air consumption >1.8M3/min

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

ULTRA-FLO 85 Castable for aluminum refractory castable cement for Iron lining, ladle lining material

ULTRA-FLO 61Refractory services lining material castable for ladle transfer metal molten refractory solution for foundry

ULTRA-CAST FLOOR Insulation castable for splashing of molten metal or slag

STEEL-RAM 92S Foundry refractory for coreless induction furnace refractory System for Coreless Induction Furnace

STEEL-RAM 92H Neutral ramming mass refractory material for vcauum inductin furnace

SIL-RAM 121ZN Refractory lining for coreless furnace Aluminum Melting and Holding Furnace

SFR-MICA Mica Paper slip plane for the backing of the coreless induction furnace

SFR-JOLTER specialized vibrator tools for dry vibrating material

SFR-BOARD Nano insulation board for the channel furnace melting and holding Iron

COIL-CRETE 390 High quality castable coil cement coil grout material for coreless induction furnace

ALU-RAM 951 Spinel ramming mass lining material for coreless induction furnace

ALU-RAM 950ST Alumina ramming mass dry-type refractory Anti-slag coating for work lining melting Aluminum

ALU-RAM 950 Alumina refractory lining material for Aluminum and Zinc melting of coreless induction furnace ramming mass

ALU-RAM 130CU Refractory for non-ferrous alloy in coreless induction furnace for copper Melting and Holding

ALU-PAK 79CR Spout and Repair Material for various Non-ferrous alloy with low phosphorous plastic refractroy

ALU-PAK 73CR Repair coating material silica ramming mass for coreless induction furnace refractory for patching