Aluminum Industry
SINO-FOUNDRY—professional refractory manufacturer
- Aluminum Industry
-
Refractory for melting and holding furnace
-
Major aluminum industry products
-
Selection criteria of refractories for aluminum industry
-
Lining design and products selection
-
Installation process of low cement castable
-
Sintering process of low cement castable
-
Refractories reveb melting furnace
-
Refractories for stack melting furnace
-
Aluminum holding furnace & refractories for low pressure casting furnace
-
Refractories for aluminum melting rotary furnace
-
-
High insulation aluminum transfer ladle
-
Refractory for treament process
-
Coreless Induction Furnace Lining material for molten aluminum alloy
-
ULTRA-BOND® series quick repair castable
-
Heat-Resistant floor castbles
-
DR-06 nano insulation materials
-
Auxiliary materials for aluminum industry furnace construction
-
Composition of refratories for aluminum industry
1/1
Number of views:
1075
详细描述
Request of melting and holding furnace
1、SAFETY LAYER
Prevent the penetration of aluminum No deformation and low shrinkage.
A、ULTRA-CAST 300AR:High mechanical strength and anti-penetrarion property,apply for bottom safety layer of big furnace.
B、ALU-LITE 26AR:Lighter than ULTRA-CAST® 300AR,better insulation, apply for bottom safety layer of small furnace.
2、 WORKING LINING OF BOTTOM AND SIDE WALL (contact with aluminum)
Non-wetting property; Resistance to corundum growth. Anti-erosion property.
A、ALU-FLO 94ARWith high performance for advanced request;
B、ALU-FLO 86ARMain recommended product;
C、ALU-FLO 60ARSmall unit or depends on request.
3、ROOF AND UPPER WALL
Resist to alkali attack at 980 -1150℃ Good thermal shock and erosion resistance.
A、ALU-FLO 80Low cement castable based on high purity alumina,with excellent erosion and impact resistance.
B、ALU-FLO 60/70Low cement castable based on mullite.
4、DOOR FRAME, BURNER
thermal shock resistance
erosion resistance
mechanical impact resistance
ALU-FLO 80Low cement castable based on high purity alumina,with excellent erosion and impact resistance.
5、TAPPING HOLE
Excellent erosion resistance
anti-wetting of aluminum
A、 ALU-FLO 94AR
B、 ULTRA-CAST SIC Low cement castable based on silicon carbide, specially designed for tapping hole, can be cast on site or supplied as replaceable precast pieces.


Item | Location | Product Recommendation |
1 | Hearth,lower sidewall |
ALU-FLO 94AR、ALU-FLO 87AR、ALU-FLO 86AR、ALU-FLO 81AR、 |
2 | ramp |
ALU-FLO 94AR、ALU-FLO 87A、RALU-FLO 86AR |
3 | Sub-hearth,backup lining of lower sidewall |
ULTRACAST 300AR |
4 | tap hole blocks |
ULTRACAST SIC、ULTRACAST 65SIC |
5 | work lining for the roof |
ULTRA-FLO 71, ULTRA-FLO 61,ULTRA-FLO 51 |
6 | backup lining for the roof |
ALU-LITE 20 |
7 | upper sidewall work lining |
ULTRA-FLO 71, ULTRA-FLO 61,ULTRA-FLO 51 |
8 | bumer blocks |
ALU-FLO 80 |
9 | insulation layer for the hearth and sidewall | SFR-PAPER Ceramic paper SFR-BROAD Ceramic board |
10 | lintel,jamb area |
ALU-FLO 80、ULTRA-FLO 71 |
11 |
door of the furnace |
ULTRA-FLO 51、ULTRACAST 200 |
12 |
refractory anchor |
Alumina base |

WeChat public account

View mobile website
Contact Us
Address : No. 99, Yiqing Road, Gaozi Street, EconomicDevelopment Zone, Dantu District, Zhenjiang City
Fax : +86-511-85683066
E-mail : sales@sfr168.com
Website : http://www.sfr168.com
Copyright © 2021 Sino-Foundry Refractory(Jiangsu) Co.,Ltd. All Rights Reserved.
苏ICP备19058941号-1
Powered by:www.300.cn Changzhou
搜索