Spout and Repair Material manufacturers take you to understand the knotting process of wear-resistant ramming materials

Spout and Repair Material manufacturers tell you that there are many steps in the whole process of wear-resistant ramming material, and knotting is some of the more important processes. And the process of knotting can also affect the service life of the furnace. In the process of knotting, what should we pay attention to to ensure that it does not affect the service life of the furnace?

1. The basic is of course the standard operation process, but in addition, there are many precautions in the knotting process of the wear-resistant ramming material. For example, the Spout and Repair Material manufacturer tells you to ensure that the power supply and the water supply system are perfected before knotting, and to prepare in advance through the staff on each project. Of course, it also includes that the staff are not allowed to carry any combustibles on the work site, of course, including mobile phones, keys and other items.
2. The Spout and Repair Material manufacturer tells you that adding sand in the process of wear-resistant ramming material is a process with strict requirements. For example, sand must be added at one time, and should not be added in stages. Of course, when adding sand, ensure that The sand is laid flat on the bottom of the furnace, and cannot be piled up in a pile, otherwise the particle size of the sand will be separated.
3. When tying the knot, I have to operate it according to the method of shaking first and then vibrating. And pay attention to the method to ensure that the process of operation should be light and then heavy. And the rocker should be inserted to the bottom at one time, and every time the stick is inserted, it should be shaken eight to ten times.
4. After the bottom of the furnace is finished, make sure that it can be put into the dry pot stably. Only in this way can we ensure that the forming is relatively standard, generally it will be a standard annular triangular ring. Spout and Repair Material manufacturers tell you that there are many steps that need to be paid attention to in the whole knotting process, and each step cannot be ignored.