Alumina ramming mass manufacturer will show you: the ramming material is in the knotting process

The manufacturer of Alumina ramming mass tells you that the whole process of ramming material has many steps, and the knotting is some of the more important processes. And the knotting process can also affect the service life of the furnace. Alumina ramming mass manufacturer tells you what should we pay attention to in the process of knotting, so as to ensure that the service life of the furnace will not be affected?

1. The manufacturer of Alumina ramming mass tells you that the basic standard is of course the standard operation process, but in addition, there are many precautions in the knotting process of the ramming material. For example, to ensure that the power supply and water supply system are perfect before knotting, it is also necessary to pass the staff on each project in advance to make preparations in advance. Of course, it also includes that the staff are not allowed to carry any combustibles to the work site, of course, it also includes some items such as mobile phones and keys.

2. The manufacturer of Alumina ramming mass tells you that adding sand in the process of ramming is a more stringent process. For example, the sand must be added at one time and should not be added in batches. Of course, when adding sand, ensure that the sand is flat. At the bottom of the furnace, it should not be piled in a pile, otherwise it will cause the particle size of the sand to separate.

3. When tying the knot, we must operate it in the manner of shaking first and then shaking. The manufacturer of Alumina ramming mass tells you to pay attention to the technique and ensure that the operation process should be light and heavy. And the joystick must be inserted to the bottom once, and every time the stick is inserted, it must be shaken eight to ten times.

4. The manufacturer of Alumina ramming mass tells you that after the stove bottom is finished, it must be ensured that it can be put into the dry pot steadily. Only in this way can it be ensured that the forming is relatively standard, and it will generally be a standard annular triangle ring. Of course, in the whole knotting process, there are many steps that need to be paid attention to, and each step cannot be ignored.