Spout and Repair Material manufacturers take you to understand the application of refractory castables on coke can lids

Spout and Repair Material manufacturers tell you the advantages of refractory castables after they have achieved good results on coke can lids:
1. Energy saving and environmental protection. After the coke tank uses light refractory castables instead of alloy linings, good results have been achieved in terms of thermal insulation and energy saving. Spout and Repair Material manufacturers tell you that the tank wall temperature is reduced from 500°C to 150°C, which greatly reduces the thermal radiation to the environment and the thermal damage to the lifting device during the use of the coke tank, and improves the steam volume and power generation of the CDQ coke oven.

2. The operation safety of the coke tank is improved. Spout and Repair Material manufacturers tell you that a coke tank lined with lightweight castables can store red coke for a long time without worrying about thermal damage to the tank body and lifting mechanism due to high temperature.
3. High-strength mullite light castables are more suitable for coke tank lining. Spout and Repair Material manufacturers tell you that by comparison, the use of high-strength mullite light castables can achieve a service life of more than half a year. At the same time, the maintenance cost will be lower than that of the alloy lining plate structure, and the economic benefit is very significant.
4. The refractory castable has a good thermal insulation effect as a lining, which greatly reduces the heat loss of red coke and the damage to the tank and surrounding components caused by high temperature, and solves the problem of the lining plate falling off and entering the CDQ oven and blocking the rotary sealing valve. problems, eliminates potential safety hazards, and has significant economic benefits.
5. The safety of coke quenching process is improved. Spout and Repair Material manufacturers tell you to use lightweight castables as the lining. When the coke is worn, it will enter the CDQ furnace as powder fragments to prevent large alloy linings from falling off and entering the CDQ furnace with red coke. Causes the phenomenon of blocking the rotary seal valve.