The foundry refractory manufacturer tells you to set Y-shaped and T-shaped metal anchors of two different specifications on the sprayed inner lining. Welding process for welding.

Refractory for non-ferrous alloy manufacturers tell you that refractory materials are also important basic materials in the non-ferrous metallurgical industry, and are the main bearers of physical and chemical erosion and mechanical damage of high-temperature melts. The size and structure of refractory bricks have strict requirements.

The foundry refractory manufacturer tells you that the sleeve lime kiln has changed the original positive pressure operation mode of the vertical kiln, and now it is changed to negative pressure operation without smoke and dust overflow, which is more conducive to environmental protection requirements.

The Silica ramming mass manufacturer tells you that the refractory ramming mass is prepared from a high proportion of granular materials and a very low proportion of binders and other components, and even all of them are composed of granular and powdery materials, which need to be rammed strongly Bulk materials for construction in the same way.

Silica ramming mass manufacturers tell you that the proportion of granular and powdery materials in the ramming material is very high, while the proportion of binder and other components is very high, while the proportion of binder and other components is very low, or even all It consists of granules and powder.

Low phosphorous plastic refractroy is a refractory plastic made from phosphoric acid and phosphate. It is characterized by better high temperature performance, but higher cost and shorter shelf life.