What are the basic characteristics of refractory dry ramming mass

2022-02-24

refractory dry ramming mass is a semi-dry, bulk refractory formed by ramming. Usually, the granules and fine powders made of high-aluminum materials are made with a certain gradation and an appropriate amount of binder is added. During construction, it needs to be vigorously rammed to obtain a dense structure.

Introduction to the properties of refractory dry ramming mass

2022-02-18

Refractory dry ramming mass is dry or semi-dry loose, most have no binder before molding, so only strong ramming can get a dense structure. The refractory dry ramming mass manufacturer tells you that most ramming materials have low room temperature strength before sintering.

5 basic characteristics of refractory dry ramming mass

2021-12-29

Refractory dry ramming mass is a semi-dry, bulk refractory material formed by ramming. Usually particles and fine powders made of high-alumina materials are made according to a certain gradation and added with an appropriate amount of binding agent.

Process and flow of Mica Paper slip plane

2021-12-28

The manufacturer of Mica Paper slip plane tells you that the mica paper production process mainly includes seven steps: crushing, grading, pulping, papermaking, forming, pressing, and drying.

Classification of Mica Paper slip plane

2021-12-27

The manufacturer of Mica Paper slip plane tells you that mica is a naturally occurring layered silicate mineral. It has excellent physical and electrical properties and the characteristics of maintaining the above properties at high temperatures.

The manufacturer of Mica Paper slip plane takes you to understand the role of mica

2021-12-24

The manufacturer of Mica Paper slip plane tells you that there are many types of natural mica. There are two kinds of muscovite and phlogopite used as electrical insulation materials.

The manufacturer of Mica Paper slip plane takes you to understand the pressing process of mica paper

2021-12-23

The manufacturer of Mica Paper slip plane tells you that the higher the linear pressure between the press rolls, the more beneficial the dewatering of the mica paper.

The temperature of the dry vibrating material of the intermediate frequency furnace can reach 2000 degrees

2021-12-22

The dry vibrating material of the intermediate frequency furnace is made by mixing refractory aggregates, powders, binders, admixtures with water or other liquids with a certain gradation, and is constructed by ramming (manual or mechanical).